Documents / Report

The Roswell Report: Fact vs. Fiction in the New Mexico Desert

USAF / The Black Vault · 1995 · 882 pages · text by OCR

The Roswell Report: Fact versus Fiction in the New Mexico Desert was published by Headquarters United States Air Force in 1995. The Black Vault distributes this copy. It reproduces the report by Col. Richard L. Weaver and the synopsis by 1st Lt. James McAndrew, both written after a General Accounting Office inquiry requested by Representative Steven Schiff. The Air Force search found no evidence of an extraterrestrial craft or crew. It concluded that the Roswell debris most likely came from NYU Flight No. 4, a Project MOGUL balloon train.

  • p. 190 …Well, Boford was Navy, that was the Navy... Q: Like taking a Pi Ball reading now…
  • p. 191 …fabricate balloons for us. During that period we heard of the Navy project that was going…
  • p. 207 …But were any of those used as precursors to Mogul or... A: None whatsoever. That was…
  • p. 270 …Ewing had conducted considerable research for the Navy during World War II, studying, among other things…
  • p. 323 …f) Measurements of actual sound channel transmission using a small stratosphere balloon carrying sound receivers and…
  • p. 657 …At the present time this company cannot supply us with balloons until Navy clearance is obtained…
  • p. 693 …for six hours using a non-extensible envelope with the addition of a ballast valve to…
  • p. 704 …Met Gifford who has 90' sea rescue boat this project is planning to use. Stayed at…
  • p. 705 …Wyckoff, Hungerfield, Vaux and myself regarding Navy participation with us in Crossroads. Captain Kellogg of Weather…
  • p. 718 …Schneider up with O'Day to check use as NYU station. Alamoggrdo crew helped get helium…
3 foot diameter balloons, no attachments excepting an inflation tube or appendix made of the balloon film about 10 inches long and 1.4" diameter.

2 each made from Polyethylene PM-1 film .004" thick

2 each made from Polyethylene PM-1 film .008" thick

2 each made from Saran type M film .00225" thick

15 foot diameter balloons with inflation tube 4" in diameter and 12" long, also means for attaching rigging lines supporting a 25-pound load to bottom of balloon and means for attaching auxiliary lifting balloons to top of balloon. If possible, balloon should be capable of withstanding internal pressure equivalent to 2" water.

5 each made from Polyethylene PM-1 film .004" thick

5 each made from Polyethylene PM-1 film .008" thick

5 each made from Saran Type M film .00225" thick

(1) The balloon film should be treated before or after manufacture in such a way as to seal all pinholes.

(2) A patching kit should be furnished for use of the balloon flight personnel.

(3) It is desired that either the volume of the 15 foot balloons be known to within 10 to 20 cubic feet when fully inflated or that the volume, though unknown, be nearly the same for each of the balloons of this size (differences in volume should not exceed $ \pm 1 \% $ of the total volume of a mean balloon).

Delivery was made 20 April 1947 on the first 3 foot balloons, two 15 foot balloons are expected by the end of May.

In an attempt to interest another manufacturer in the problem, the following companies were contacted.

Company	Type of Company	Interested?	Disposition
Dobeckman Co.
500 Fifth Avenue, NYC	Plastics & Packaging	No	None
Kennedy Car Liner & Bag
Co. Shelbyville, Ind.	Plastics & Packaging	No	None

Cited by

Cases discussed

About this file

Report, cited by the archive. The PDF is mirrored here; the original link is under it. The text was read from the page images by an OCR model; expect the odd misread word. 882 pages are in the text index: search them above, or from the library's search.