Documents / Report

The Roswell Report: Case Closed

Internet Archive · 232 pages · text by GLM-OCR

The Roswell Report: Case Closed was published by Headquarters United States Air Force and written by Captain James McAndrew, with a foreword by Secretary of the Air Force Sheila E. Widnall. It follows the 1994 Air Force report, which tied the 1947 debris to Project MOGUL balloons. This volume concludes that the reported alien bodies were most likely anthropomorphic dummies dropped from high altitude balloons. It attributes the hospital body claims to a 1956 KC-97 crash and a 1959 manned balloon mishap.

  • p. 10 …Fiction In The New Mexico Desert. 2. The International UFO Museum and Research Center, Roswell, N…
  • p. 21 …1992 Socorro (N.M.) Defensor Chieftan soliciting witnesses of flying saucer crashes in New Mexico. When…
  • p. 131 …Fiction in the New Mexico Desert (Washington, D.C.: U.S. Government Printing Office, 1995), 20…
  • p. 189 …We drove down to the Plains of San Agustin which is west of Socorro, New Mexico…
  • p. 230 …Fiction in the New Mexico Desert rubber 5,8 Ruidoso, N.M. 124 ## S SAC. See…

Read from the scan by GLM-OCR; expect the odd misread word.

experiments at Muroc (now Edwards) AFB, Calif., to measure the effects of acceleration and deceleration during high-speed aircraft ejections. $ ^{36} $ Stapp required a dummy that had the same center of gravity and articulation as a human, but, unlike the Ted Smith dummy, was more human in appearance. A more accurate external appearance was required to provide for the proper fit of helmets, oxygen masks, and other equipment used during the tests. Stapp requested the Anthropology Branch of the Aero Medical Laboratory at Wright Field to review anthropological, orthopedic, and engineering literature to prepare specifications for the new dummy. $ ^{37} $ Plaster casts of the torso, legs, and arms of an Air Force pilot were also taken to assure accuracy. $ ^{38} $ The result was a proposed dummy that stood 72 inches tall, weighed 200 pounds, had provisions for mounting instrumentation, and could withstand up to 100 times the force of gravity or 100Gs.

In 1949, a contract was awarded to Sierra Engineering Company of Sierra Madre, Calif., and deliveries began in 1950. $ ^{39} $ This dummy quickly became known as "Sierra Sam."

In 1952, a contract for anthropomorphic dummies was awarded to Alderson Research Laboratories, Inc., of New York City. $ ^{40} $ Dummies constructed by both companies possessed the same basic characteristics: a skeleton of aluminum or steel, latex or plastic skin, a cast aluminum skull, and an instrument cavity in the torso and head for the mounting of strain gauges, accelerometers, transducers, and rate gyros. $ ^{41} $ Models used by the Air Force were primarily parachute drop and ejection seat versions with center of gravity tolerances within one quarter inch.

Over the next several years the two companies improved and redesigned internal structures and instrumentation, but the basic external appearance of the dummies remained relatively constant from the mid 1950s to the late 1960s. Dummies of these types were most likely the "aliens" associated with the "Roswell Incident."

Figs. 21& 22. Examples of a "Sierra Sam" (left) and Alderson Laboratories anthropomorphic dummies (right) of the type dropped from balloons at off-range locations throughout New Mexico during the 1950s. (U.S. Air Force photos)

Cited by

Cases discussed

About this file

Report, cited by the archive. The PDF is mirrored here; the original link is above. The text was read from the page images by GLM-OCR; expect the odd misread word. 232 pages are in the text index: search them above, or from the library's search.