Documents / Report
This July 1994 report from the Office of the Secretary of the Air Force (SAF/AAZ) was prepared in response to a General Accounting Office audit that Congressman Steven Schiff requested about the 1947 Roswell Incident. The report describes Air Force searches of records and interviews with people involved, including Sheridan Cavitt. It found no records of a cover-up, alien bodies or extraterrestrial materials. It concludes that the debris found near Roswell most likely came from a Project Mogul balloon that was never recovered.
“Anderson”1 page
(\ auspices of FUFOR, entitled "Roswell in Perspective" (1994). Pflock concluded from his research that the Brazel Ranch debris originally reported as a "flying disc" was probably debris from a Mogul balloon; however, there was a simultaneous incident that occurred not far away, that caused an alien craft to crash and that the AAF subsequently recovered three alien bodies therefrom. Air Force research did not locate any information to corroborate that this incredible coincidence occurred, however. In order to provide a more detailed discussion of the specifics of Project Mogul and how it appeared to be directly responsible for the "Roswell Incident," a SAF/AAZD researcher prepared a more detailed discussion on the balloon project which is appended to this report as Atch 32. Other Research In the attempt to develop additional information that could help explain this matter, a number of other steps were taken. First, assistance was requested from various museums and other archives (Atch 28) to obtain information and/or examples of the actual balloons and radar targets used in connection with Project Mogul and to correlate them with the various descriptions of wreckage and materials recovered. The blueprints for the "Pilot Balloon Target ML307C/AP Assembly" (generically, the radar target assembly) were located at the Army Signal Corps Museum at Fort Monmouth and obtained. A copy is appended as Atch 29. This blueprint provides the specification for the foil material, tape, wood, eyelets, and string used and the assembly instructions thereto. An actual device was also obtained for study with the assistance of Professor Moore. (The example actually procured was a 1953-rnanufactured model "C" as compared to the Model B which was in use in 1947. Professor Moore related the differences were minor) • An examination of this device revealed it to be simply made of aluminum-colored foil-like material over a stronger paper-like material, attached to balsa wood sticks, affixed with tape, glue, and twine. When opened, the device appears as depicted in Atch 31 (contemporary photo) and Atch 25 (1947 photo, in a "balloon train"). When folded, the device is in a series of triangles, the largest being four feet by two feet ten inches. The smallest triangle section measures two feet by two feet ten inches. (Compare with descriptions provided by Lt Col Cavitt and others, as well as photos of wreckage). Additionally, the researchers obtained from the Archives of the University of Texas Arlington (OTA), a set of original (i.e. flrst generation) prints of the photographs taken at the time by the Fort Worth Star-Telegram, that depicted Ramey and Marcel with the wreckage. A close review of these photos (and a set of first generation negatives also subsequently obtained from UTA) revealed several infesting observations. First, although in some of the literature cited above, Marcel allegedly stated that he had his photo taken with the "real" UFO wreckage and then it was subsequently removed and the weather balloon wreckage substituted for it, a comparison shows that the same wreckage appeared in the photos of Marcel and Ramey. The photos also depicted that this material was lying on what appeared
Report, cited by the archive. The PDF is mirrored here; the original link is above. 22 pages are in the text index: search them above, or from the library's search.