Documents / Official release
CIA-UAP-003, The Central Intelligence Agency and Overhead Reconnaissance; The U-2 and OXCART Programs, 1954-1974
Central Intelligence Agency · 1954 · 406 pages · text from the file's own layer
This is a Secret History Staff monograph by Gregory W. Pedlow and Donald E. Welzenbach of the Central Intelligence Agency, published in 1992. It gives a history of the CIA's manned overhead reconnaissance program from 1954 to 1974, covering the development and operation of the U-2 and the A-12 OXCART aircraft. It covers overflights of the Soviet Union, the 1960 downing of Francis Gary Powers, and later operations. One section is titled "U-2s, UFOs, and Operation BLUE BOOK."
From the source:Release of 2026-06-12 This CIA History Staff document chronicles the complete history of the U-2 and OXCART (A-12) high-altitude reconnaissance aircraft programs from 1954 to 1974, detailing their development, operations over the Soviet Union and other targets worldwide, the famous downing of Francis Gary Powers in 1960, organizational reforms following that incident, and the eventual transfer of operations from CIA to Air Force control. A more redacted version of this document has been available on CIA's public website.
“Lockheed”60+ pages
- p. 4 …8
Lockheed CL-282 Supporters and the CIA. ........................................ 13
Scientists and Overhead Reconnaissance ............................................... 17
The BEACON…
- p. 6 …260
Competition Between Lockheed and Convair ...................................... 267
The Selection of the Lockheed Design .............. ... ................ ................ 270
Efforts To…
- p. 12 …excellent technical study of the U-2: Lockheed U-2
(l 983).
There has also been…
- p. 22 …Immediately after returning to California, Carter proposed to
Lockheed Vice President L. Eugene Root (previously the…
- p. 23 10
Secret ld0F8RN
Chapter 1
Lockheed also submit a design. Carter noted that the proposed aircraft…
- p. 24 …who then asked Lockheed to Kelly Johnson
. sμbmit a specific proposal. In early April, Kelly Johnson…
- p. 25 .
12
Sec,et NOFORN
Chapter 1
The Lockheed CL-282 Development Planning. According to Wienberg, General…
- p. 26 …Despite the Air Force's selection
of the X-16, Lockheed continued to work on the…
- p. 27 …Proposals for special reconnaissance aircraft have been re
ceived in the Air Staff from Lockheed. Fairchild…
- p. 28 …range are not as good as the
Lockheed CL-282. :;
Gardner's enthusiasm for the CL…
- p. 29 …Few detaiils about Dulles's precise attitude
toward the proposed Lockheed reconnaissance aircraft are available,
but…
- p. 37 …for Philip Strong of the CIA had told him that the
Lockheed Aircraft Corporation had designed…
- p. 39 …Thus, even though
the Lockheed CL-282 had several important sources of support by
September I954…
- p. 40 …Council.'A
Project Three Support for the Lockheed CL-282
Chapter 1
James R. Killian, Jr…
- p. 42 …Agency.~·1
Land learned the details of Lockheed's proposed CL-282 aircraft
soon after he…
- p. 43 30
Sec, et NOFORM
Chapter 1
briefly mention a Lockheed design for a high-flying aircraft…
- p. 44 …During September and October the Project Three study group
met frequently to discuss the Lockheed design…
- p. 47 …The Lockheed super glider will fly at 70,000 feet, well out of the
reach of…
- p. 48 …Putt, to oppose the adoption of the Lockheed design. The officials ar
gued that the Bell…
- p. 49 …He used Gardner's
statement to convince Lockheed's senior management to approve the
project, which…
- p. 50 …small group of prominent scientists that the
Lockheed design represented the best possible overhead reconnais-
sance…
- p. 52 …afternoon of 3 Decembeli, they
' Although the Lockheed CL-282 was not designated as the U…
- p. 53 …r the airframes to be built by Lockheed. His query was
greeted with silence. Everyone present…
- p. 55 …This category in
cluded maintenance and support personnel from Lockheed (five per
aircraft), the pilots, and…
- p. 56 …to be
settled, including the contract with Lockheed. Nevertheless. work on
the U-2 began as…
- p. 57 …A general contractor such as Lockheed
can purchase much, if not all, of the supplies needed…
- p. 58 …During the final contract negotiations in the spring
of 1958, Lockheed and the US Government agreed…
- p. 59 …Aircraft," 9 Dc:cc:mbc:r 195-i.
Lockheed Contract Filc:s. OSA Records (S ).
SeeFet
- p. 61 …F. Boc:hrne. Summary Report:
Reconnaissance Aircraft. Lockheed Aircraft Corpor.ition Report I04'.!0. 28 January…
- p. 63 …1954, even before the CIA adopted
the Lockheed proposal. Baker quickly recognized, however, that he
would…
- p. 69 …1-2 (TS Codeword); Miller, Lockheed U-2. pp. 19-20.
Sea,at
- p. 70 …By July 1955 the base
was ready, and Agency, Air Force, and Lockheed personnel began
moving…
- p. 74 61
project-the construction and testing of the aircraft-remained the ex
clusive province of Lockheed…
- p. 77 …The first model of the
pressure suit, used by Lockheed test pilots, made no provision for…
- p. 79 …Geary told Culbertson that the Lockheed
CL-282 was going to be known officially as the…
- p. 81 …former director of Lockheed's Skunk Works.
10 Donald E. Welzenbach, 14 March 1986 (U): Miller…
- p. 84 …7 (TS Codeword); Miller, Lockheed U-2, p. 22.
"' OSA Hiswry, chap. 8, pp. 12-14…
- p. 85 …how to transfer Lockheed employees
from Burbank to Area 5 l without arousing a great deal…
- p. 88 …Colonel Yancey was in charge of six SAC pilots who were to be
trained by Lockheed…
- p. 90 …CIA, which then placed an order with
Lockheed for 29 U-2s in configurations to be…
- p. 107 …U-2
cover story stating that a Lockheed-developed aircraft would be flown
by the USAF…
- p. 143 …Lockheed mechanics
had mounted the various RAINBOW devices on the prototype U-2, a
Lockheed test…
- p. 144 …Unable to restart the power plant, Lockheed tesi: pilot
Robert Sieker bailed out but was struck…
- p. 145 …The loss of one of Lockheed's best test pilots. as well as the pro
totype…
- p. 157 …As a substitute,
Lockheed began working to develop a paint with radar-suppressant
qualities, but this…
- p. 162 …After a series of tests over Edwards AFB, Lockheed began coating
the U-2s with a…
- p. 188 …Although it had been refurbished by
Lockheed and now had the more powerful 175 engine that…
- p. 199 …In the meantime Pow1ers began working for Lockheed
as a U-2 pilot. In March 1963…
- p. 200 …Beschloss claims that Powers was tired by Lockheed
for criticizing the Agency in his memoirs (which…
- p. 209 …2
One week later Colonel Geary called to order Lockheed to up
grade six older U…
- p. 211 …In May 1961, Lockheed began modifying Agency U-2s so that
they could be refueled in…
- p. 220 …story, which
was that its pilots were Lockheed employees on a ferry flight to
Puerto Rico…
- p. 230 …for Detachment C
Late in l 958, Lockheed began refitting the Agency's 13 remaining
U…
- p. 235 …STPOLLY
added the more advanced Lockheed P3A in 1963. Between 1955 and
1967, when the CIA…
- p. 236 …U-2 missions, and the Air Force, which had
Lockheed P-2V7 and P3A
reconnaissance aircraft
- p. 238 …The planes were maintained by Lockheed mechanics under con
tract to the CIA. The Agency attempted…
- p. 255 …All Air Force and CIA U-2s were or
dered back to Lockheed for ultrasonic inspection…
- p. 260 …The Agency dispatched several pilots to Taiwan under the cover
of Lockheed employees working on a…
- p. 264 …G in California-with three more at Lockheed undergo
ing repair. The Agency had originally ordered…
- p. 265 …Francis Gary Powers was one of the Lockheed test pilots who
checked out this new aircraft…
277
Seeret NOFORN
Chapter 6
eventually to the fuselage itself, creating what is known as a chine on
each side. At first Johnson was concerned that these additions might
impair the airworthiness of the plane, but wind tunnel testing deter
mined that the chines actually imparted a useful aerodynamic I ift to
the vehicle. Because titanium was very brittle and therefore difficult
to bend, Johnson achieved the necessary curvature by combining tri
angular-shaped pieces of titanium called fillets. These fillets were
glued to the framework of the chines with a special adhesive, epoxy
resin .
On later OXCART modds the fillets were made from electri
cally resistive honeycomb plastic with a glass-fiber surface that
would not melt at high speed. When struck by a radar pulse, the com
posite chines tended to absorb the pulse rather than reflect it. A simi
lar approach was used for the leading edges of the wings. Again
electrically resistive honeycomb material was fabricated into tn.J1ngu
lar shapes, known as wing teeth, and fitted into the titanium wings.
Both the metal and composite fillets and teeth were held in place with
the newly developed epoxy cements.
_. The greatest remaining area of concern in the A- l 2's radar cross
section was the two vertical stabilizers. To reduce radar ·reflections,
Kelly Johnson canted the stabilizers inward 15° and fabricated 'them
out of resin-impregnated nonmetall ic materials. Once these changes
were completed, the only metal in each vertical stabilizer was a s.tain
less steel pivot. The Air Force, which later ordered several versions of
the OXCART aircraft for its own use. never adopted the laminated
vertical stabii izers."
THE OXCART CONTRACT
By mid-January 1960, Lockheed had demonstrated that i ts concept of
shape, fuel additive, and nonmetallic parts would reduce the
OXCART's radar cross section substantially. Richard Bissell, howev
er. was very upset to learn that the changes had led to a reduction in
the aircraft's performance. which meant it would not be able to aiuain
the penetration altitude he had promised to President Eise nhower.
Kelly Johnson then proposed to reduce the aircraft's weight by 1,000
pounds and increase the fuel load by 2.000 pounds, making it possible
"Johnson. ··D,: veloprnc:n1 of Lo<:khcci.l SR-71 : · pp. 6-7: OSr\ Hiswry. chap. '.!O. p. ~;5 (TS
Codeword).
$ee,et
Not linked to a story yet.
About this file
Official release, from the pursue collection. The PDF is mirrored here; the original link is above. 406 pages are in the text index: search them above, or from the library's search.