Documents / Official release

CIA-UAP-003, The Central Intelligence Agency and Overhead Reconnaissance; The U-2 and OXCART Programs, 1954-1974

Central Intelligence Agency · 1954 · 406 pages · text from the file's own layer

This is a Secret History Staff monograph by Gregory W. Pedlow and Donald E. Welzenbach of the Central Intelligence Agency, published in 1992. It gives a history of the CIA's manned overhead reconnaissance program from 1954 to 1974, covering the development and operation of the U-2 and the A-12 OXCART aircraft. It covers overflights of the Soviet Union, the 1960 downing of Francis Gary Powers, and later operations. One section is titled "U-2s, UFOs, and Operation BLUE BOOK."

From the source:Release of 2026-06-12 This CIA History Staff document chronicles the complete history of the U-2 and OXCART (A-12) high-altitude reconnaissance aircraft programs from 1954 to 1974, detailing their development, operations over the Soviet Union and other targets worldwide, the famous downing of Francis Gary Powers in 1960, organizational reforms following that incident, and the eventual transfer of operations from CIA to Air Force control. A more redacted version of this document has been available on CIA's public website.

  • p. 24 …April 1954. Lo.:khec:d Corporation. Advanced Devdopmcnt Projec:ts Divi~ion. Burbank. California. Sec,et
  • p. 58 …Pedlow, Burbank, California, 26 August 1988. 6eeret 11
  • p. 85 …how to transfer Lockheed employees from Burbank to Area 5 l without arousing a great deal…
  • p. 273 …SP-1362, "History of the OXCART Program," Lockheed Aircraft Corporation, Burbank, CA. I July 1968, p…
  • p. 287 …designed trailer truck that carried it from Burbank to Area 5 I. By 18 November 1959…
  • p. 296 …not test the OXCART aircraft at its Burbank facility, where the runway was too short and…
  • p. 297 …Construction began in September 1960; a C-47 shuttle s,ervice ferried work crews from Burbank…
  • p. 299 …The plane left Burbank on 26 February 1962 and arrived at Area 51 two days later…
  • p. 304 …into the engine nacelles during assembly at Burbank were sucked into the power plant during initial…
  • p. 372 …293 BUORL 22 Burbank. California 45 &eeret NOFe"N Index Burke. William 168 120 114 Byeloruss1a…
274
Sec1 et NOFOAN
Chapter 6
to proceed with antiradar studies, aerodynamic structural tests, and en
gineering designs. This research and all later work on the A-12 took
place under a new codename. Project OXCART. established at the end
of August 1959 to replace its more widely known predecessor, Project
GUSTO.'" The CfA's project manager for OXCART was John
Parangosky, who had long been associated with the U-2 program.
EFFORTS TO REDUCE THE A-12'S
RADAR CROSS SECTION
During the spring of 1959, Kelly Johnson's Skunk Works crew
which then numbered only 50-had begun building a full-scale
mockup of the proposed aircraft. The mockup was to be tested for its
radar cross section by Edgerton, Germeshausen & Grier (EG&G) in
cooperation with the Scientific Engineering Institute at a small testing
facility at Indian Springs. Nevada. Lockheed objected to this site be
cause its pylon would not support the full-scale mockup and because
the facilities were in full view of a nearby highway. On IO September
1959, EG&G agreed to move its radar test facility to the former U-2
testing site at Area 51 of the Atomic Energy Commission's Nevada
Proving Grounds. 11
When the new radar test facility with its larger pylon was ready.
Johnson put the A-12 mockup on a specially designed trailer truck
that carried it from Burbank to Area 5 I. By 18 November 1959, the
mockup was in place atop the pylon. and radar testing could begin.
These tests soon proved that Lockheed's concept of shape. fuel addi
tive, and nonmetallic parts was workable, but it would take more than
18 months of testing and adjustment before the OXCART achieved a
satisfactory radar cross section.
It was in the course of this radar testing that the OXCART
received its characteristic cobra-like appearance. Edward Purcell and
Franklin Rodgers had come up with a theory that a continuously
curving airframe would be difficult to track with a radar pulse be
cause it would present few corner reflectors or sharp angles from
which pulses could bounce in the direction of the radar. To achieve
the continuously curving airframe, Kelly Johnson added thin. curved
extensions to the engine housings and leading edges of the wings and
'"Parangosky interview (S): OSA History. chap. 20. pp. 19-21 (TS Codeword).
,· OSA History, chap. 20. p. 22 (TS Codeword).
-SesreL

Not linked to a story yet.

About this file

Official release, from the pursue collection. The PDF is mirrored here; the original link is above. 406 pages are in the text index: search them above, or from the library's search.