Documents / Official release
This Defense Intelligence Reference Document, dated 14 December 2009, was prepared by the Defense Intelligence Agency's Defense Warning Office under its Advanced Aerospace Weapon System Applications program. It is a technical review of metallic glasses that covers their structure, processing, mechanical behavior and possible aerospace uses. It concludes that composites with ductile dendrites in a glass matrix hold the most promise for structural use. It also finds that widespread aerospace adoption depends on developing new lightweight glass-forming alloys.
From the source:Release of 2026-09-18 Incident: 12/14/09, Las Vegas, Nevada. Released with redactions. This document is a Defense Intelligence Reference Document (DIRD), a technical reference format used by the Defense Intelligence Agency (DIA) to capture baseline knowledge on a specific topic for later analytic use. DIRDs are best understood as reference and synthesis products rather than as original research. It is one of 38 DIRDs produced under the Advanced Aerospace Weapon System Applications Program (AAWSAP) between 2009 and 2011. Because AAWSAP’s scope permitted a broad range of supporting topics, not every DIRD in the series directly concerns aerospace systems or future threat assessment. The following summary reflects the DIRD’s scope and framing at the time of writing and should not be read as implying current validation of the concepts discussed. This DIRD surveys metallic glasses as a potentially important class of aerospace materials and describes their amorphous structure as offering very high strength and unusual manufacturing advantages, but also significant drawbacks, especially poor ductility and fatigue resistance. The document concludes that the most promising aerospace applications are likely to come from metallic-glass-matrix composites rather than single-phase glasses, because these composites can retain high strength while greatly improving fracture toughness and fatigue performance, potentially enough to substitute for high-strength steels in some space-limited structural uses. At the same time, the report judges that broader aerospace use will depend on substantial progress over the next 20–50 years in alloy design, processing, and especially the development of lightweight systems, including aluminum-based options.
UNCLASSIFIED//FOR OFFICIAL "!I! Ofltt Silicon carbide 00. 1 Q.. .......... b:,,., .c bl) 0 ,0! d (I) l;j Vl u (.0 ......<.) Q) 0.. 0 .00 1 C/) Spe ifi tiffn s , E/ p MPa m kg- 1 a Metallic gJas Dendrili c a \ _ compo ites~~e Wood Aluminum O Alumlna p lym rs (aloog grain) lilnnlum 0 0 0 .1 lO lO . 100 (I.) (/J Q) C: .c 10b l} :;j 0..... Q.) I-; 2(..) Cd i... u.. Figure 9. Materials Property Charts. (a) Strength and stiffness (both norma lized to density) of meta llic glasses (yellow) and dendrltic metall ic glass matrix compo sites (red) compared with other materials. (b) Damage to lerance. On this plot, the dashed lines represent contours of equal fracture energy. In both plots, polymer co mposites (CFRP and GFRP) are represented by Isotropic averages; continuous fiber composites can have greater strength and stiffness In a direction parallel to the flbers .39 18 UNCLASSIFIED/ /liiOA. OfifilQl.t.k lel&& 8HLY / Pol Stiffne (b) ~<"· ✓ r, t",sF/ Dcndritic c mpo ite Low lloy steels Nick I-based superalloys Hardwood (along grain) 10 100 E (GPa) 1000
Not linked to a story yet.
Official release, from the pursue collection. The PDF is mirrored here; the original link is above. 30 pages are in the text index: search them above, or from the library's search.