“Nevers”49 pages
- p. 17 …of alien beings and elusive vehicles which never quite
seem to manifest themselves. Regardless of one…
- p. 31 …Conversely, there
has never been any previous documentary evidence produced by those who
would debunk the…
- p. 32 …This had never been
officially done before, although most of the persons contacted reported that they…
- p. 40 …Lt Col Cavitt also
stated that he had never taken any oath or signed any agreement…
- p. 77 …Because this conclusion is based on
the absence of documentation, the issue can never be definitively…
- p. 99 …H written, there is
good evidence through accessioning and microfilming records that the Agency never
received…
- p. 101 …histories and
supporting documents, and it has never routinely received the kind of records which
might…
- p. 159 …I have never been sworn to any form of secrecy by anyone concerning this matter and…
- p. 165 …It never crossed my mind that it could be anything but a radio sonde.
RW: How…
- p. 168 …as far as I knew, I never heard anyone say, "Don't talk about this
and…
- p. 169 …I never met LaPaz personally, but I knew what he was.
RW: Did Rickett go with…
- p. 170 …I forget since I was there in the Washington
area for awhile but I never did…
- p. 172 …To the best of my recollection, I never met the rancher, Brazel.
RW: O.K., because…
- p. 173 …rve never seen a Geiger counter myseU: but I didn't know if you knew what…
- p. 174 …ordered Marcel to accompany the rancher back
to Corona, •· You said you never saw... and then…
- p. 175 …I never had any idea that it was anything with the V-2. They told us…
- p. 177 …You and I never saw this. You don't see
any military people or military vehicles…
- p. 178 …said in a facetious way: "Lets make out like it never existed, because we're wasting…
- p. 179 …to him the crash and recovery had never happened.
There was no investigation on the Foster…
- p. 182 …No, I never saw this.
SC: I don't know what that is from.
RW: "But…
- p. 183 …So, some of there
records were TS and still are.) That is because they have never…
- p. 185 …Cav never
told me anything. He said nl never tell you anything then you won't…
- p. 189 …I am quite sure that we never gave it a thought until that book.
- p. 190 …Now, we have never found the ftight records to
substantiate that, so I don't know…
- p. 202 …related
to this inquicy and I have never been threatened by US Government persons concerning not…
- p. 207 …related to this inquiry
and I have never been threatened by US Government persons concerning refraining…
- p. 213 …We never considered a ..planneq cover story; we were concerned with security.
I was the project…
- p. 214 …I never obsCJVed any of the balloon "trains" but I
did see some of the early…
- p. 225 …and subsequent models were
brand new, had never flown anything like that in this area.
A…
- p. 228 …I'd never heard the
name Mogul -- the classification was that high. I knew what we…
- p. 240 …I just wanted to see
if there had been anything stated to you never to discuss…
- p. 242 …but I never knew Marcel.
in my mind, and there are
Yeah, I knew that guy…
- p. 243 …I've never seen a Japanese balloon that I know
of, I've never seen the…
- p. 246 …No, I've never seen this.
Trakowski argued that even the name Mogul was classified,
and…
- p. 249 …Out PM with
several NYU men by weapons carrier, but we never located it.
Rocket postponed…
- p. 264 …As far as I know we just
never interfaced with the military.
Q: Where were you…
- p. 266 …We never saw
anybody in security. There was certainly nobody keeping us
secure. If anything, we…
- p. 273 …who was writing a story,
and I never quite could determine whether he was on the…
- p. 274 …I have never seen such a document nor have I ever heard of
any effort to…
- p. 277 …radar
reflectors for tracking purposes-but it never comes out talking about MOGUL and the instrumentation…
- p. 278 …I never met Richard Robert Crane. I knew him only by the path of debris he…
- p. 282 …They never said it, but I know they did because they left me free to
do…
- p. 318 …Before now, however, a larger portion of the story was never
told. Recent research indicates that…
- p. 320 …and Project MOGUL as first conceived was never put into operational 1use.
However, MOGUL did serve…
- p. 321 …Moore, NYU Constant-Level
Balloon Project Engineer, stated that they were never informed of the classified…
- p. 567 …and this flight 11as never recovered. Pre-
sumably the marked easterly flow then observed above 60…
- p. 591 …ficienoy since on-ot.f' operation was never per-
mitted.
The temperature data of' these flights…
- p. 740 …The theodolite lost the balloon in clouds earlier and
the airplane observer never succeeded in seeing…
- p. 815 …Out pm with several NYU by weapon carrier but we never located it. Rocket
postponed until…
t.mperature recording is confined to the lo'tier
2 inches of the drum so as to interfere as little as
poasible with the pressure record when the bel loon
float• above 30,000 teet.
Recording is accomplished by three pens which scratch
carbon from a smoked aluminum toil. This method
eliminates the need :for liquid ink and applies a
minimwn of pressure to the recording drum.
The recording dr~ rotates once in twelve hours.
Therefore, it a :flight lasts over twelve hours, the
trace will overlap. Such a record is shown in
Figure 36. The clock runs for 36 to 40 hours on
one winding.
Preparation of the barograph :for use on a balloon
a~ension requires the followinga
(a) Place an aluminum :foil about 10 inches long by
3 3/4", .002" thick on the drum. Care should
be taken to have the overlapping edge of the
:foil :face in the direction of rotation of the
drum so the. t the stylus &lides ott the edge in-
stead ot catching and tearing the :foil. A few
drops of rubber cement along each edge or the
:foil are sufficient to :fasten the roil to the drum
and will not interfere with removal of the foil
after reoovery or the barograph.
(b) Wind the clock. The clock should not be wound
tightly since at the low temperatures encountered
in the upper atmosphere the clock spring may
snap. However, if the clock is wound an hour
or so before release, it·will be sufficiently
relaxed by the time the low temperatures are
reached.
(c) Check pressure of the marking pens. Too much
pressure of the pens on the drum will introduce
an error due to the frictional lag. When the
drum is removed :from the clock mechanism, and the
pen lifter released, the stylus points should
touch the clock housing lightly.
(d) Smoke the drum. A very thin, tine-grained carbon
film should be deposited on the aluminum foil.
The best result will be obtained by use of a
bright yellow gas flame, although a kerosene flame
gives a satisfactory coating. Solid or liquid
-66-