Documents / FOIA release
roswell
Office of the Secretary of Defense · 993 pages · text from the file's own layer
The Roswell Report: Fact versus Fiction in the New Mexico Desert was published in 1995 by Headquarters United States Air Force. It was written in response to Representative Steven H. Schiff's request and a General Accounting Office audit, and it contains Col. Richard L. Weaver's report and 1st Lt. James McAndrew's synopsis, along with attachments, appendices and photographs. The report says researchers found no evidence of an extraterrestrial craft or crew. It concludes that the 1947 debris came from a Project MOGUL balloon train.
“Headquarters”29 pages
- p. 1 THE
ROSWELL
REPORT
Fact versus Fiction
in the
New Mexico Desert
Headquarters United States Air Force…
- p. 7 Clinical Investigations and Life Sciences Division, Headquarters Air Force Medical
Operating Agency, Bolling AFB, DC; John…
- p. 28 …the disc had been "flown to higher headquarters." That same
story also reported that a Roswell…
- p. 30 …These locations
include Fort Worth, Texas, the home of the Eighth Air Force Headquarters;
possibly Sandia…
- p. 71 DEPARTMENT OF THE AIR FORCE
HEADQUARTERS UNITED STATES AIR FORCE
MEMORANDUM FOR
FROM: AFiiN
SUBJECT:
References…
- p. 75 …DuBose says
officials at the Headquarters of the Eighth Air Force were
directed to tell the…
- p. 81 DEPARTMENT OF THE AIR FORCE
HEADQUARTERS UNITED STATES AIR FORCE
WASHINGTON DC
MEMORANDUM FOR SAF/AAZ…
- p. 89 DEPARTMENT OF THE AIR FORCE
HEADQUARTERS UNITED STATES AIR FORCE
09 Mar94
MEMORANDUMFORSAF/AAZ
ATIENTION: Lt…
- p. 107 …Colonel Loberg,
Headquarters, Eighth Air Force, arrived this date to
coordinate with S-3 and check…
- p. 108 …Boatright,
Headquarters, Eighth Air Force, arrived to coordinate with
Statistical Control on cost analysis.
16 July…
- p. 133 HEADQUARTERS, ARMY AIR FORCES
WASHINGTON
SUBJECT: Iuuance o! Ordera
!01 Couaa8.1ng General
.A.1r Materiel…
- p. 144 …we haven't s~uadron or grou~
headquarters should take their people away.
1:55 P…
- p. 159 …I did not make a report of this incident to my headquarters since I felt that…
- p. 165 …700 CIC was the CIC Headquarters.
- p. 166 …700 CIC was the Headquarters?
SC: Yes, I don't think I even made a report…
- p. 167 …I think this was taken at the Headquarters at Carswell.
RW: Yeah, that's right. That…
- p. 168 …I took it to 8th Air Force Headquarters, General Ramey was excited; they were
going to…
- p. 177 …I don't even want 700 CIC Headquarters to know we wasted our time on it…
- p. 178 …So that, to me, implies that this would have been
your CIC Headquarters also sent some…
- p. 227 …I was assigned, believe it or not, to Headquarters, Air
Force .•• I still have the Headquarters…
- p. 265 …on the basis of orders out of Headquarters
Army Air Force.
Q: While you were operating…
- p. 266 …These are the pictures taken in General Ramey's office,
8th Air Force Headquarters by a…
- p. 282 …Then after I left the headquarters of ARDC in
Baltimore, I spent four years at the…
- p. 318 …debris be flown to Eighth
Air Force Headquarters at Fort Worth AAF, TX, for his personal…
- p. 327 …Andrews AAF was headquarters
of the Army Air Forces Weather Service. It is also interesting to…
- p. 407 HEADQUARTERS FITZWILLIAM FORWARD
c/o Commander, Task Group 7.2
APO 187, c/o Postmaster
San…
- p. 409 …arrival of the explo-
sion sound wave. Headquarters FITZ\nlliArA FCRI1ARD furnished ARPACAS 3-1 and…
- p. 964 …Morgan, from Headquarters Eighth Air
Force, ;'las here to confer with the Engineering Officer,
Captain ?cterson…
- p. 984 …Marcellus Duffy eliminated
it and several others from the project when Headquarters U.S.
Army Air…
General--Helix mounted in a rigid frame to
prevent lengthwise movement or springing
out through bending of a frame.
Joined to motor drive by a pin through both
drive shaft and helix shaft.
When rotating e. t about l rpm duration of
signals not over 3 to 4 seconds.
Surface of helix to be polished withrouge
or crocus cloth.
Loading edge of the metal spiral will be
true and sm.ooth to within .0005 inch.
(4) Motor:
6 to 7.5 volts
l rpm gear train
20 to 40 milliemperes drain
Constant speed--change of speed during any
single revolution not more than 0.3%
Speed change at low temperature not more
than !:20%
(5) Mounting of Unit:
Mounting in such manner that temperature
changes and stresses will not change the
relative positions of the aneroid e.nd the
helix. This may be done by mounting all
elements on a f-" metal plate or by mounting
all parts in a frame supported on a single
pedestal.
Mount unit in an easily opened, stiff single
thickness cardboard or plastic box to pro-
tect it from other units in flight trains.
External terminal strip with four terminals
connected to ground, motor, refe renee, and
pressure.
Total weight not over 600 grams.
Overall dimension not over 5 x 5 x 4 inches.
To be mounted in transmitter, where insula-
tion will prevent cooling below ooc within
6 hours at air temperature of -4oo to -sooc.
-63-
About this file
FOIA release, from the osd collection. The PDF is mirrored here; the original link is under it. 993 pages are in the text index: search them above, or from the library's search.