“Fort Worth”32 pages
- p. 12 …Fort Worth Star-Telegram, Photographs of Balloon Debris, July 9, 1947
17. Satement, Lt. Col. Sheridan…
- p. 13 …Fort Worth Star-Telegram, Photographs of Balloon Debris, July 9, 1947
2. Organizational Chart, Watson Laboratories…
- p. 30 …These locations
include Fort Worth, Texas, the home of the Eighth Air Force Headquarters;
possibly Sandia…
- p. 34 …DC;
Federal Records Center, Ft Worth, TX; the INSCOM Archives, Fort Meade, MD;
National Air and…
- p. 38 …in the famous photos (Atch 16) in Fort Worth was that of a
radar target normally…
- p. 39 …were told was a flying saucer to Fort Worth. The people on
board included ... and Maj…
- p. 40 …Newton was a weather officer assigned to Fort Worth, who was on duty when
the Roswell…
- p. 45 …photographs taken at the time by the Fort Worth Star-Telegram, that depicted
Ramey and Marcel…
- p. 46 …the wreckage prior to its getting to Fort Worth. This organization
reported on July 20, 1994…
- p. 51 …After the autopsies, conspiracy theorists said
the bodies were flown to Fort Worth and then
to…
- p. 75 …Some of the debris was flown to Fort Worth,
..as where the Commander of the Eighth…
- p. 101 …Center (WNRq or the Southwest Regional
Depository (Fort Worth, Texas).
Recommendations
Because the records management policy…
- p. 151 16
Fort Worth Star-Telegram
Photographs of Balloon Debris
July 9, 1947
- p. 159 …taken to Eighth AU- Force
Headquarters in Fort Worth where it was subsequently identified as a…
- p. 167 …Marcel took it to Fort Worth. Yeah that's the ...
RW: ·Yeah. That doesn't look…
- p. 168 …into Wright-Pat
and Kirtland, or to Fort Worth. Back and forth, loaded up, with very…
- p. 174 …Then it said: "After Marcel had gone to Fort Worth and came back Marcel
challenged the…
- p. 176 …O.K."Marcel would take some ofthe sample to Fort Worth to show Ramey. In the…
- p. 179 normal course of his duty was sent to Washington not 8th Air Force in Fort Worth…
- p. 254 …But the Roswell morning paper
clearly showed that there was a knowledgeable person in Fort
Worth…
- p. 266 …Headquarters by a news photographer of the Fort
Worth Star Telegram. It's four pictures that…
- p. 309 …I was the only weather forecaster on duty in the Fort Worth base weather
and flight…
- p. 318 …flown to Eighth
Air Force Headquarters at Fort Worth AAF, TX, for his personal inspection. Upon…
- p. 326 …Before the announcement was made, the "disc" was flown to Fort Worth AAF,
at the direction…
- p. 327 …giant thermos jug" was allegedly transported
from Fort Worth AAF to Wright Field. 38 This description…
- p. 329 designs on it."41 Furthermore, the Fort Worth Army Airfield Weather Officer,
Irving Newton, who was…
- p. 333 Fort Worth Star-Telegram
Photographs of Balloon Debris
July 9, 1947
1
- p. 640 …Similarly, the Fort Worth Sub-Committee established a procedure
for flights made within the Fort V1orth…
- p. 707 …Air Coordinating Committee, Fort Worth Regional
Airspace Subcommittee.
Subject: Obstructions to ·air navigation ••••.•••••••••••••••••••••••••• 43
Memorandum from…
- p. 713 …Secretary a
SUBJECT
AIR COORDINATING COMMITTEE
FORT WORTH REGIONAL AIRSPACE SUBCOMMITTEE
P. O. BOX 1689
FORT…
- p. 715 …BOX 1689
FORT WORm 1_ mxAS
September 2, 1947
C1-tairman, Ft. Worth Regional Airspace Subcommittee…
- p. 812 …Arrived in
Fort Worth about 9 EDST. Off again to Big Springs, Texas, where forced to…
OPERATIONS MANUAL
I. INTRODUCTION
A. Purpose of Manual
This manual is designed to serve as a guide in the prepar-
ation. launching. and tracking operations of constant-
level balloons. In the body of this manual, most of the
discussion applies specifically to the 20-foot diameter
balloon developed by General Mills, Inc. In Section IX,
a brief description is given of the other sizes of balloons
used for constant-level flight. The manual is based upon
the experiences and investigations of the Constant Level
Balloon Project, Research Division of the College of Engineer-
ing, New York University. The charta and tables which were
developed to use for this work are included in Appendix II
of the manual.
B. Principles of Altitude Control
For constant-level work, non-extensible balloons are used
for three reasons:
(l) With a given weight of equipment, it is possible to
determine before the release of the balloon, the
maximum altitude Which will be attained.
(2) Without special control equipment, it is possible
to maintain a nearly constant altitude for periods
from one to six hours, depending upon atmospheric
conditions and floating level. Generally, it is
not possible to extend such flights through a sun-
set.
(3) By adding altitude control equipment, it is possible
to maintain the balloon at various nearly constant,
predetermined levels for periods of much more than
six hours regardless of the time of day.
II. GENERAL MILLS 20-FOOT BALLOONS
A. Description
General Mills, Inc. of Minneapolis, Minnesota, has de-
veloped a series of non-extensible, plastic balloons.
These balloons are tear-drop in shape, made from extruded
polyethylene sheet, 0.001" thick. Cells are currently
produced.with a diameter of 7, 20, 30 and 70 feet. The
-7-