“Fort Worth”32 pages
- p. 12 …Fort Worth Star-Telegram, Photographs of Balloon Debris, July 9, 1947
17. Satement, Lt. Col. Sheridan…
- p. 13 …Fort Worth Star-Telegram, Photographs of Balloon Debris, July 9, 1947
2. Organizational Chart, Watson Laboratories…
- p. 30 …These locations
include Fort Worth, Texas, the home of the Eighth Air Force Headquarters;
possibly Sandia…
- p. 34 …DC;
Federal Records Center, Ft Worth, TX; the INSCOM Archives, Fort Meade, MD;
National Air and…
- p. 38 …in the famous photos (Atch 16) in Fort Worth was that of a
radar target normally…
- p. 39 …were told was a flying saucer to Fort Worth. The people on
board included ... and Maj…
- p. 40 …Newton was a weather officer assigned to Fort Worth, who was on duty when
the Roswell…
- p. 45 …photographs taken at the time by the Fort Worth Star-Telegram, that depicted
Ramey and Marcel…
- p. 46 …the wreckage prior to its getting to Fort Worth. This organization
reported on July 20, 1994…
- p. 51 …After the autopsies, conspiracy theorists said
the bodies were flown to Fort Worth and then
to…
- p. 75 …Some of the debris was flown to Fort Worth,
..as where the Commander of the Eighth…
- p. 101 …Center (WNRq or the Southwest Regional
Depository (Fort Worth, Texas).
Recommendations
Because the records management policy…
- p. 151 16
Fort Worth Star-Telegram
Photographs of Balloon Debris
July 9, 1947
- p. 159 …taken to Eighth AU- Force
Headquarters in Fort Worth where it was subsequently identified as a…
- p. 167 …Marcel took it to Fort Worth. Yeah that's the ...
RW: ·Yeah. That doesn't look…
- p. 168 …into Wright-Pat
and Kirtland, or to Fort Worth. Back and forth, loaded up, with very…
- p. 174 …Then it said: "After Marcel had gone to Fort Worth and came back Marcel
challenged the…
- p. 176 …O.K."Marcel would take some ofthe sample to Fort Worth to show Ramey. In the…
- p. 179 normal course of his duty was sent to Washington not 8th Air Force in Fort Worth…
- p. 254 …But the Roswell morning paper
clearly showed that there was a knowledgeable person in Fort
Worth…
- p. 266 …Headquarters by a news photographer of the Fort
Worth Star Telegram. It's four pictures that…
- p. 309 …I was the only weather forecaster on duty in the Fort Worth base weather
and flight…
- p. 318 …flown to Eighth
Air Force Headquarters at Fort Worth AAF, TX, for his personal inspection. Upon…
- p. 326 …Before the announcement was made, the "disc" was flown to Fort Worth AAF,
at the direction…
- p. 327 …giant thermos jug" was allegedly transported
from Fort Worth AAF to Wright Field. 38 This description…
- p. 329 designs on it."41 Furthermore, the Fort Worth Army Airfield Weather Officer,
Irving Newton, who was…
- p. 333 Fort Worth Star-Telegram
Photographs of Balloon Debris
July 9, 1947
1
- p. 640 …Similarly, the Fort Worth Sub-Committee established a procedure
for flights made within the Fort V1orth…
- p. 707 …Air Coordinating Committee, Fort Worth Regional
Airspace Subcommittee.
Subject: Obstructions to ·air navigation ••••.•••••••••••••••••••••••••• 43
Memorandum from…
- p. 713 …Secretary a
SUBJECT
AIR COORDINATING COMMITTEE
FORT WORTH REGIONAL AIRSPACE SUBCOMMITTEE
P. O. BOX 1689
FORT…
- p. 715 …BOX 1689
FORT WORm 1_ mxAS
September 2, 1947
C1-tairman, Ft. Worth Regional Airspace Subcommittee…
- p. 812 …Arrived in
Fort Worth about 9 EDST. Off again to Big Springs, Texas, where forced to…
The number of mols in a balloon volume may be readily computed
by dividing the air density, expressed in molar volume. at a given
altitude into the balloon volume. 1he lift of the gas filling the
balloon at any altitude is then equal to the number of mols multiplied
by the buoyancy per mol. For example: To find the lift of the gas in
a completely inflated (hydrogen tilled) balloon of 20-foot diameter,
at an altitude where the pound molar volume is 1000 ft. 3 (This is equivalent
to about 30,000 ft.):
3
Volume of a 20-toot diameter sphere =4190 ft •
Number of mols in sphere at this altitude • 4190 • 4.19 mole
iooo
Buoyancy • 4.19 mols x 26.65 /buoyancy/mol • 111.7 # lift given by
the gas at 30,000 feet.
In one step, this becomes:
Gross Lift/Balloon = (Balloon Volume) x (Difference in molecular weights of
air and lifting gas~
Molar Volume at a given ait~tude
Conversely, the maxtaum altitude to Which a given size balloon will
carry itself and a specified load can be determined, as a molar volume, which
may be evaluated from a graph of altitude versus molar volume. Such graphs,
computed as in Part A of this Section, are given in Figures 19 and 20, at
the left hand edge.
Hydrogen and helium lifts were computed for various molar volumes
for spheres of lifting gas with diameters from 7.5 to 75 feet. Figures 19
and 20 were plotted using the values computed. To use these figures to
determine the maximum altitude of a balloon with a specified pay load, enter
the table with required buoyancy (balloon weight plus payload). Go vertically
to the diagonal line representing the balloon's size, and then read horizontally
on the left hand edge, either the molar volume or the equivalent altitude over
- 17 -